100 davids drive hauppauge ny 11788 631-436-7400 fax: 631-436-7430 www.miteq.com image rejection mixers - ir series mixer reference chart features ordering information typical test data custom design capabilities outline drawings additional products available fax-back page back to mixer home page mixer home page image rejection mixers ir series low-noise front ends and subsystems iso 9001 registered company
image rejection mixers conversion rf loss 3 lo image lo-rf model frequency 2 (db) power 4 rejection 3 isolation number 1 (ghz) (typ./max.) (dbm) (db, min.) (db, typ.) outline notes: 1. for x suffix, see sideband code table. 2. narrow bands below 0.8 ghz are available. please contact factory. 3. standard models are supplied with octave bandwidth if frequency ranges centered at yyy mhz. see if frequency code table. parameters stated are measured at if band center. octave and multioctave options available. 4. standard lo drive level is +10 to +12 dbm. optional drive levels are available. see lo drive code table. if rf if2 i q optional sideband select ttl or 15 v lo features low conversion loss rf/lo frequencies to 20 ghz in moderate to octave bands if frequencies from 1 to 2000 mhz in octave to multioctave bands optimized performance available output configurations include: single sideband dual sideband voltage-selectable sideband quadrature if outputs available (iq series) integrated if-preamplifiers available (rp series) standard image rejection mixer reference chart for additional information and technical support, please contact bill roehrich at tel.: (631) 439-9273 ?fax: (631) 436-7430 ?e-mail: broehrich@miteq.com low-noise front ends and subsystems web page: www.miteq.com/d32 irm008010xyyy 0.8 ?1 6.5 / 7.5 +10 to +12 18 20 124747 irm010020xyyy 1 ?2 6.5 / 7.5 +10 to +12 18 20 124747 irm015020xyyy 1.5 ?2 6.5 / 7 +10 to +12 18 20 124747 irm020040xyyy 2 ?4 7 / 7.5 +10 to +12 18 20 124747 irm021023xyyy 2.1 ?2.3 7 / 7 +10 to +12 18 20 124747 irm023025xyyy 2.3 ?2.5 7 / 7 +10 to +12 18 20 124747 irm037042xyyy 3.7 ?4.2 7 / 7 +10 to +12 18 20 124747 irm040060xyyy 4 ?6 7 / 7.5 +10 to +12 18 20 124747 irm054059xyyy 5.4 ?5.9 7 / 7 +10 to +12 20 20 124747 irm055080xyyy 5.5 ?8 7 / 8 +10 to +12 18 20 124747 irm085096xyyy 8.5 ?9.6 7 / 8 +10 to +12 20 20 112373 irm095105xyyy 9.5 ?10.5 8 / 8 +10 to +12 20 20 112373 irm100120xyyy 10 ?12 8 / 8.5 +10 to +12 18 20 112373 irm120150xyyy 12 ?15 8 / 8.5 +10 to +12 18 20 112373 irm150180xyyy 15 ?18 8 / 8.5 +10 to +12 18 20 112373 irm160190xyyy 16 ?19 8 / 9 +10 to +12 18 20 112373
irm0850966060 typical test data ordering information to specify an image rejection mixer, please choose from the standard image rejection mixer reference chart and specify if, lo and desired sideband codes from the following tables. image rejection mixer ir x 10 ghz x 1 ghz x 10 ghz x 1 ghz low frequency band end high frequency band end sideband code if frequency code lo drive code number format lo drive codes if frequency codes (yyy) sideband code (x) third-order lo output intercept range 1 db c.p. (dbm, typ.) code (dbm) (dbm, typ.) output input standard m +10 +12 1 6 12 optional j +7 +9 -6 1 7 h +14 +16 2 9 15 v +19 +21 7 14 20 u +24 +26 11 18 24 standard u upper sideband reception; rf > lo l lower sideband reception; rf < lo optional d dual-sideband outputs; if1 = usb, if2 = lsb s1 selectable sideband; control: +15 v = usb, -15 v = lsb s2 selectable sideband; control: +15 v = lsb, -15 v = usb t1 ttl selectable sideband; control: 1 = usb, 0 = lsb t2 ttl selectable sideband; control: 1 = lsb, 0 = usb i/q series - quadrature if outputs (contact the factory) if freq. if freq. type code (mhz) standard octave bandwidth 001 999 1 999 1k0 2k0 1000 2000 examples: 060 = 60 mhz, 100 = 100 mhz and 1k2 = 1200 mhz. optional multioctave bandwidth w01 1 100 w02 10 300 w03 30 1000 w04 100 1000 code description for additional information and technical support, please contact bill roehrich at tel.: (631) 439-9273 ?fax: (631) 436-7430 ?e-mail: broehrich@miteq.com low-noise front ends and subsystems web page: www.miteq.com/d32 rf frequency (ghz) 8.5 8.72 8.94 9.16 9.38 9.6 conversion loss and image rejection (if = 60 mhz, lo = +10 dbm, usb reception) 2 4 6 8 10 conversion loss (db) 30 26 22 18 14 image rejection (db) image rejection conversion loss if frequency (mhz) 120 60 0 60 120 rf frequency (ghz) 8.88 8.94 9 9.06 9.12 conversion loss with fixed lo (lo = 9 ghz) 6 12 18 24 30 36 conversion loss (db) usb lsb
outline drawings outline 124747 weight 58 grams typical outline 112373 weight 23 grams typical if2 port (dual-sideband only) 0.125 [3.18] dia. thru mounting holes (typ. 2 places) 1.95 [49.53] 1.05 [26.67] 1.70 [43.18] 0.38 [9.65] 0.475 [12.07] if1 port 0.45 [11.43] 0.125 lo port 0.38 [9.65] typ. rf port 0.97 [24.77] 0.41 [10.49] 0.60 [15.14] 0.18 [4.65] sma female (typ. 3 places) (optional male) 0.96 [24.38] 0.10 dia. [2.54] dia. thru mounting holes (typ. 2 places) 0.38 [9.56] typ. if port 0.41 [10.41] 1.0 [25.40] rf port lo port 0.33 [8.26] 0.08 [2.03] sma field replaceable female (typ. 3 places) (optional male) 1.16 [29.46] 0.84 [21.34] 0.16 [4.06] 0.50 [12.70] 0.82 [20.83] 0.66 [16.79] custom design capabilities miteq specializes in custom design mixers optimized to meet the customer s needs. for price, delivery and technical information, please complete and return the enclosed fax-back form, or contact one of our engineers. optimized frequency ranges offer improved: conversion loss image rejection vswr dynamic range integrated functions available (see back page) please refer to our rp series for standard line image rejection mixers with if-preamplifiers: rf if lo for additional information and technical support, please contact bill roehrich at tel.: (631) 439-9273 ?fax: (631) 436-7430 ?e-mail: broehrich@miteq.com low-noise front ends and subsystems web page: www.miteq.com/d32 note: dimensions are in inches [millimeters]. note: dimensions are in inches [millimeters].
double-balanced mixers double-balanced mixer-preamplifiers mixers with rf amplifiers 1 please provide price, delivery and technical information for the following image rejection mixers: date tel.: ( 63 1 ) 439-9273 f ax: ( 631 ) 436-7430 e-mail: broehrich@miteq.com www.miteq.com/d32 low-noise front ends and subsystems company contact tel. fax address 100 davids drive, hauppauge, ny 11788 tel.: (631) 436-7400 ?fax: (631) 436-7430 www.miteq.com image rejection mixer-preamplifiers supercomponents integrated assemblies please send additional information on the following products: special requirements: standard models specification parameters requirement 1 requirement 2 model number (refer to ordering information) ir __ __ __ __ __ ____ ______ ir __ __ __ __ __ ____ ______ quantity date needed custom models specification parameters requirement 1 requirement 2 rf frequency range (ghz) to to lo frequency range (ghz) to to if frequency range (mhz) to to sideband code (u, l, d, sn, tn) conversion loss (db, max.) lo power range (dbm) to to quantity date needed image rejection mixer fax-back page
100 davids drive, hauppauge, ny 11788 tel.: (516) 436-7400 ?fax: (516) 436-7430 www.miteq.com d-220 additional products available from the low-noise front ends and subsystems division www.miteq.com/d32 arz series front ends and integrated subsystems operating frequencies up to 40 ghz many rf and if signal processing function options (see below) ultra-low noise figure integrated low phase noise sources upconverter, downconverter and transceiver configurations waveguide interface options digital i/o options ieee 488 rs422 power supply options dc bias 120/240 vac package options include channelized housings highly integrated housings cascaded components on an aluminum plate 19?rack enclosures vme and eurocard formats weather-resistant enclosures hermetic packaging ir series image rejection mixers moderate and octave rf/lo frequencies from 0.8 to 19 ghz moderate to multioctave if frequencies available optimized assemblies available single-sideband modulators available (ssz series) rp series image rejection mixer-preamplifiers moderate and octave rf/lo frequencies from 0.8 to 19 ghz moderate to multioctave if frequencies available optimized assemblies available choose from extensive selection of if amplifiers if signal processing functions available (see below) upconverter and downconverter applications m series double-balanced mixers octave and multioctave rf/lo frequencies up to 40 ghz low conversion loss optimized assemblies available (mdz series) mp series double-balanced mixer-preamplifiers octave and multioctave rf/lo frequencies up to 26 ghz moderate and octave rf/lo frequencies from 0.8 to 19 ghz moderate to multioctave if frequencies available optimized assemblies available choose from extensive selection of if amplifiers if signal processing functions available (see below) optional rf and if signal processing options for arz, rpz and mpz series wide selection of rf and if amplifiers filters attenuators switches phase shifters couplers/coupler detectors analog and digital i/o if lna rf lo if rf lo rf lo rf if lo rf if lo rf if lo video
|
